Welcome to Henan Lingfine Machinery Co., LTD.

[wzg:title/]
Plastic Pyrolysis Technology Process
We all know that there are mainly two types of pyrolysis plant for sale in the market: batching and continuous tyre to oil pyrolysis plant. Clients always feel confused what is the right choice for them as they don’t know too much about the pyrolysis plant.
Read More
Waste Rubber Pyrolysis Plant
LINGFINE waste rubber pyrolysis plant is with green technology to solve tire and other environment pollution which are becoming the serious issues nowadays; and it is the meaningful and environmental industry.
Read More
Waste Plastics Pyrolysis Plant
The continuous system waste plastics pyrolysis plant works continuously, auto raw materials feeding, and at same time, the carbon black continuously discharged. With advantages of labor saving, low energy consumption, high oil output, stable equipment operation, long using life time etc.
Read More
Oil Seed Cleaning Section and Equipment
In vegetable oil seeds, some impurities are inevitably entrained. In general, the impurities in oil are 1% – 6%, and the highest is 10%. Most of the impurities mixed with oil will adsorb a certain amount of oil in the process of oil product……
Read More
Puffing Process Technology and Equipment
Working Principle Puffing pretreatment process is that, in a wet and hot state, quickly make material flake pass through the outlet of extrusion puffing machine, and make the material temperature increases rapidly from 88-110℃, moisture of soy……
Read More
Oil Pressing Technology & Oil Press Machine
Classification Oil pressing can be divided into hot pressing and cold pressing according to whether the material is subjected to heat treatment before pressing. The edible vegetable oil in our daily life is mostly hot pressed oil, that ……
Read More
Black Oil Waste Engine Oil Making Diesel Machine
Used engine oil refers to engine oil has become black and the viscosity has increased, because of mixing with water, dust, other oils as well as metal powder; it also refers to engine oil has deteriorated and produced organic acid, colloids and asphaltic substances. Recycling of waste engine oil is to removal impurities using settlement, distillation, acid, alkaline as well as filtering.
Read More
Pyrolysis Oil Distillation Machine
The waste oil to diesel fuel refinery equipment/machine is applied to recycle the waste liquid oil (such as crude oil, used engine oil, waste tyre or plastic oil from pyrolysis plant) into diesel, gasoline or base oil(from used engine oil).
Read More
Waste Engine Oil Recycling to Base Oil Plant
Waste engine oil can be recycled for reuse as lubricants. Waste engine oil becomes contaminated over time and through heavy use. Contaminants such as dirt, chemicals and water can get in and degrade the oil. Waste oil recycling systems helps industry recondition oil for reuse in factories and machines.
Read More
Fish Oil Making Machine
LINGFINE uses the international advanced negative pressure fish oil making technology. Generally the whole fish oil production line includes the following sections: Meat mincing, conveying, discharging, cooking, oil-slag separating, filtration, ……
Read More
Chicken Oil Making Machine
LINGFINE uses the international advanced negative pressure chicken oil making technology. Generally the whole chicken oil production line includes the following sections: Meat mincing, conveying, discharging, cooking, oil-slag separating, filtra……
Read More
Lard Oil Making Machine
Lard is commonly used in many cuisines around the world as a cooking fat or shortening, or as a spread similar to butter. LINGFINE uses the international advanced negative pressure lard oil making technology. Generally the whole lard oil product……
Read More
Gutter Oil Biodiesel Plant Machine
The production technologies of biodiesel are Physical method,Chemical Method,Biological enzymatic method and Engineered microalgae method, The main technology of Biodiesel Production is chemical method. Biodiesel Production Schematic ……
Read More
Vegetable Oil Making Biodiesel Machine
Vegetable oil making biodiesel machine Product: ASTM D 6751or EN14214 standard biodiesel The byproduct in biodiesel production plant Glycerol, plant asphalt. Biodiesel is a kind of biomass energy can be widely us……
Read More
Palm Acid Oil Biodiesel Making Machine
Process Advantages: 1 Multi-Feedstock Flexibility 2 Biodiesel of highest quality 3 Simple process management 4 Low operating costs Biodiesel introduction FAME Used for diesel engines or other end products Derived fro……
Read More

Available Carbon Steel

The Four Types of Steel Metal Supermarkets

Medium Carbon Steel: Typically has a carbon range of % to %, and a manganese content ranging from .060% to %. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment.

Who makes the shapes you need? American Institute of Steel

Who makes the shapes you need? AISC The following search interface gives you access to AISCs database of available structural steel shapes in the . from major steel producers as well as which mills are producing the shapes.

Carbon Steel Structural Shapes Supplier Ryerson

Carbon Structural. Ryerson offers a large array of carbon steel structural shapes, including angles, channels, I-beams and tees. These high-quality carbon shapes are available in a variety of sizes, depths, thicknesses and flange widths to accommodate their use in a variety of industries.

Different Steel Types and Properties

The carbon content in steel can range from %, but the most widely used grades of steel contain only % carbon. Elements such as manganese, phosphorus, and sulfur are found in all grades of steel, but, whereas manganese provides beneficial effects, phosphorus and sulfur are deleterious to steels strength and durability.

Carbon Steel Bar Supplier Ryerson

Carbon steel products are where Ryerson’s business began more than 170 years ago, and our buying power and reach make us a supplier of choice today. Current carbon steel bar inventory comprises a vast assortment of stock lengths, widths and diameters and includes annealed, hot rolled and cold finished carbon bars, in grades such as 1018, 1044, 1045,1045 TGP, 1117, 11L17, 1144, 12L14, 1215, A311 Stressproof, Fatigue Proof and A36.

Steel Plates, Metal Plates, TMT

Steel Plates Sizes TMT sells a large variety of metal plating from low carbon to steel alloy. TMT handles many standard sizes for ASTM A 36, commercial quality, .40 to .50, A572 and T-1 type B. Below you will find a list of steel plates sold.

Permanent corrosion protection for carbon steel: it’s real

September 27, 2016 Permanent corrosion protection for carbon steel: it’s real and it’s available now. Imagine if there was a performance coating capable of protecting your carbon steel assets from corrosion for the duration of its life, in just one application.

Steel Plate Grades Continental Steel Tube Company

STEEL PLATE COILS. Low carbon, black, and pickled and oiled steel coils are available from 3/16″ to 1/2″ thick, up to 84″ wide for precision roller levelling and cutting to standard and special lengths up to 480″.

Carbon steel

Carbon steel is a steel with carbon content up to % by weight. The definition of carbon steel from the American Iron and Steel Institute states: Steel is classified to be carbon steel when: no minimum content is specified or required for chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium, zirconium, or any other element to be added to obtain a desired alloying effect; the specified minimum for copper does not exceed percent; or the maximum content specified for a

Steel

There are many types of heat treating processes available to steel. The most common are annealing, quenching, and tempering. Heat treatment is effective on compositions above the eutectoid composition (hypereutectoid) of % carbon. Hypoeutectoid steel does not benefit from heat treatment.

  • share:

Request a quote